Easy and Quick Ways to Fix Netgear Extender Red Light Error

https://www.capacitymedia.com/Image/ServeImage?id=49130&w=780&h=442&cr=true

Getting a red light on Netgear WiFi range extender is one of the most frustrating issues experienced by users. Due to this error, users can't access internet on their devices. So, it is important to get the Netgear extender red light error fixed as soon as possible. And by reading this post, you will get to know how to stop your Netgear extender from showing the red light error. Let's dig a little deeper.

Why is My Netgear Extender Showing Red Light?

There can be several reasons making your Netgear extender show red light. A few of them are given below:

  • Your WiFi connection is congested.
  • The extender is not connected to your router properly.
  • Your Netgear extender keeps dropping the WiFi connection.
  • There is a loose or improper cable connection between your extender and router.
  • A damaged cable is being used to connect your Netgear extender and router.
  • The extender is not placed at an ideal location.
  • You are not connected to the Netgear_ext SSID.
  • Your Netgear device is getting interference from electronic devices, metal objects, and reflexive surfaces.
  • In the event that there are multiple devices connected to your WiFi router, the extender will find it extremely hard to connect to your router. As a consequence, you will see a red globe on your extender.
  • An obsolete firmware on your Netgear WiFi extender may also result in the red LED issue.
  • Partial extender reset and firmware update is another reason behind the Netgear extender red light issue.
  • No MAC address is assigned to your extender.
  • The extender is not configured properly.

So, these were some of the main reasons leading you to the Netgear WiFi range extender red light issue. Now, let's learn how to get it fixed.

Troubleshooting: Netgear Extender Red Light Error

Below-mentioned are easy and quick troubleshooting ways to get rid of the Netgear extender red light error:

  • Relocate your Netgear WiFi range extender to a ventilated area in your home.
  • Keep the extender away from metal doors, aluminum studs, microwaves, refrigerators, Bluetooth speakers, cordless phones, baby monitors, glasses, mirrors, and other interference-creating objects.
  • Be sure that there is a perfect or finger-tight cable connection between your Netgear range extender and router. Plus, no damaged cable should be used to make wired connections with your Netgear extender.
  • Connect all your devices to Netgear_ext WiFi network.
  • Confirm whether the wall socket to which your Netgear extender is connected is not short-circuited or damaged.
  • Verify if your Netgear wireless range extender is receiving constant power supply from the wall socket.
  • Check whether your Netgear extender is connected to the internet or not. If not, connect it now.
  • Update the firmware on your WiFi extender to the latest version.
  • Disconnect all devices that are unnecessarily connected to your WiFi network.
  • Make sure that you have completed new extender setup in the right away.
  • Configure your Netgear WiFi range extender's settings properly.
  • If you own a Netgear Nighthawk WiFi extender or the latest model of Netgear extender, keep in mind to enable One WiFi Name feature and assign the same SSID to the extender as that of your router.
  • Reboot your Netgear wireless extender. For those who are new to rebooting, unplug your WiFi range extender from the wall socket, wait for some time, and then plug it back in again.
  • Activate the FastLane technology on your Netgear range extender if it supports dual-band functionality.
  • Restore all the default factory settings on extender by pressing and holding the Reset button on it.

Congrats! Your Netgear extender should now stop showing the red light. On the off chance if you know any other tactic to fix the issue, feel free to share that with us through the comments section.

Post a Comment

0 Comments