2 Different Methods to Perform Netgear AC750 Setup


Netgear AC750 WiFi extender is one of the best devices to rely on if you want to access a blazing fast and seamless internet connection. All you need to do is, just set the device up! Relax! Setting up an AC750 extender doesn't take much of an effort. 

Simply walk through this article and know how to set up a WiFi extender by using two different methods. The first is by accessing the mywifiext page, and the second is by using the WPS Method.

How to Perform Netgear AC750 Setup by Accessing Mywifiext?

Mentioned below are the guidelines that'll help you performing Netgear AC750 setup by accessing the web admin panel of your WiFi extender:

Choose the Location for the Extender

  • Place the Netgear AC750 WiFi extender in a well-ventilated area. 
  • Keep electronic devices and transmitting appliances at a safe distance from your extender. 
  • Keep the WiFi range extender and your home router in close proximity. 
  • Do not place your extender near reflexive surfaces like fish tanks and mirrors. 

Power Up the Extender

  1. Plug the AC750 range extender into the wall socket. 
  2. Press the Power button located on your WiFi device.
  3. Wait until the power LED light turns green. 
  4. If the LED light doesn't turn green, power-cycle your device. 
  5. Now, start the setup process from scratch and reach the point you're reading right now. 

Connect to Netgear_Ext

  1. Grab a cable and connect your Netgear AC750 extender to the WiFi router. 
  2. Switch on your PC or laptop. 
  3. Connect your device to Netgear_ext SSID.

Go to Mywifiext.net 

  1. Open up a web browser on whatever device you're using. 
  2. You can use any web browser to perform Netgear AC750 setup as long as it's updated. 
  3. Next, type www.mywifiext.net or 192.168.1.250 in the address bar. 

Fill in the Default Admin Details

  1. Once you press the Enter key, the Netgear extender login page will appear. 
  2. Type the default username and password of your device in the given fields. 
  3. For the default admin credentials, you can refer to the Netgear AC750 manual. 
  4. Click on the Log In button and follow the on-screen instructions. 

Note: After setting up your extender manually, it is recommended that you change its password.

How to Perform Netgear AC750 Setup Using the WPS Method?

All this method requires is for you to press a little button on your WiFi device. Mentioned below are the instructions that you need to follow in order to set up your Netgear AC750 WiFi range extender by using the WPS method:

Configure the Hardware 

Connect your AC750 extender and WiFi router wirelessly. 

Power on the Netgear device and plug the power adapter into the wall socket. 

Locate the WPS Button

  1. Look for the WPS method on your AC750 WiFi extender. 
  2. The WPS button is usually located at the bottom of the device. 
  3. Once found, press it carefully. 
  4. Don't use the tips of your finger to press the button. 
  5. You can make use of an oil pin or any sharp object to press the button. 
  6. Hold the WPS button for a couple of seconds before releasing it. 

Now, change the location of your Netgear AC750 WiFi range extender. 

Note: In order to test the wireless network of the Netgear AC750 extender, you can try moving around the house with your device. 

Sum Up

This was all about how to perform Netgear AC750 setup using two different setup methods. Now, you can enjoy a seamless and blazing-fast internet connection without any unwanted issues. 


Post a Comment

0 Comments